Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Antenna mounting location and cable routing

Posted by: jack20 May 4 2015, 01:17 PM

My car previously had an antenna mounted on the cowl. I filled the hole prior to paint and bought a Hirschman antenna to mount on the fender, the proper location. I saw a location diagram on World some time back but neglected to bookmark it. Does anyone recall seeing it?
I also need to know where to drill to route the cable through the inner fender.

Thanks in advance.

Jack

Posted by: SirAndy May 4 2015, 03:58 PM

If i recall correctly they were all dealer installed, i'm not sure there is a factory correct location or if there ever was one "correct" template for the install.
dry.gif

Posted by: Mike Bellis May 4 2015, 04:11 PM

From Jeff Bowlsby

IPB Image

Posted by: Mike Bellis May 4 2015, 04:12 PM

This too...

http://bowlsby.net/914/Classic/zAcc_AntennaMountingDimensions.pdf

Posted by: Mike Bellis May 4 2015, 04:14 PM

and this

http://bowlsby.net/914/Classic/zAcc_BlauRadioInstall.pdf

Posted by: jack20 May 4 2015, 04:37 PM

Thanks so much!! This is exactly what i was looking for.
Now Ill try and locate the rubber plug in the fender well.
Jack

Posted by: worn May 4 2015, 10:10 PM

QUOTE(Mike Bellis @ May 4 2015, 03:11 PM) *

From Jeff Bowlsby

Well that looks like at least factory approved as a spot. I kinda like the retractable antenna in my 911. But don't seem to see them in the 914s. Originals more budget oriented? Or is it just gauche? I can't hear it much anyway but still. They don't snap off if they are in the down position.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)