This includes -
The fuel filter
1- 12mm hose from pump to filter
1- 7mm hose from filter to tank
1- 7mm pump to engine line (connect to pump and delivery to engine plastic line)
1- 7mm return to tank line (other plastic hose into tank)
The 12mm hose is a pain to find so I brought it in.
These hoses are all made in Germany.
Note the picture with the fuel pump is for illustration only.
The second picture is what is in the GB
I filled my tank for WCR a few days before the rally and when I came back out in the morning I only had a half tank, the other half was on the asphalt, what a mess.
Attached thumbnail(s)
Great offer ! These hoses are hard to see and a good idea to replace if you want peace of mind.
Tell Jannelle, nice looking counter top.
is the 12mm hose rated for our nasty ethanol gas?
Yes these are the high pressure ones rated for ethanol.
Up on the site as if you replace the steering puck you should do these too.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)