Printable Version of Topic

Posted by: Dominic Feb 19 2005, 03:40 PM

Have you guys sent Jake a check for the New 2.0L rods ???

If he does not get the money soon this deal will be gone.

If you have ever priced a set of Carrillo or Pauter rods for your 914 then you know that this is a steal !

If you ever plan to build a stock 2.0 engine for driving or competition (in a stock class) then you should get a set of these rods, we will probably never see a price like this for a set of custom H beam rods that are half the wieght of the stock rod ever again.

It's not too late to send Jake $310.00 for a set of these NEW 2.0L rods....... SEE INFO BELOW:


Please send all funds in the form of check or money order to

Raby Enterprises Inc.
Attn R&D
47 Raby Drive
Cleveland GA 30528


Make checks payable to Raby Enterprises Inc.

Remember that I MUST have all 50 sets of rods sold by March 1

Posted by: Bleyseng Feb 19 2005, 03:45 PM

No, got the email that he will be sending me an invoice but I gots nothing. I will send it out but shit sometimes this group buy stuff is for the birds.

Geoff

Posted by: vsg914 Feb 19 2005, 03:48 PM

I got my email, but have not sent the check. I will do it monday. Thanks for the reminder.

Posted by: rhodyguy Feb 19 2005, 03:54 PM

i sent an email requesting the invoice as per intructions. reply was "cool". i haven't heard another word from him regarding the rods.

k

Posted by: Bleyseng Feb 19 2005, 04:00 PM

yep, same as me... I was waiting for an invoice since Jake says one is forthcoming.
I have read the STF posts about it too.


My cash is in hand just was waiting for promised invoice.

Posted by: rhodyguy Feb 19 2005, 04:09 PM

cross post. i sent a check w/o an invoice. consider getting one in the mail if you can as there's no mail on monday.

k

Posted by: Dominic Feb 19 2005, 04:54 PM

The e-mail was the invoice as far as I know. He is not sending me anything in the mail, he doesn't have our mailing address yet.

Posted by: rhodyguy Feb 19 2005, 05:02 PM

a bit more than "cool" would've been more insightful. maybe "you're on the list send, the check". got mine out today with scott's stickers. still, thanks for the heads up. let's keep out fingers crossed.

k

Posted by: rdauenhauer Feb 19 2005, 05:53 PM

I did. F it. I figure if he screws me I know where to find him
I ll be spending a fair bit of time down in his neck o woods coming up anyway.

Posted by: type11969 Feb 21 2005, 07:20 AM

Jake posted at least on the stf that the rest of the invoices are going out today.

Posted by: Jake Raby Feb 21 2005, 07:34 AM

I am working on invoices now....

If you received my email you will have an invoice by tomorrow.

I have received some funds so far from guys that have not been invoiced.

Until I get enough $ for the 50 sets of rods NO ONES check will be cashed, they are locked up in my safe.

This way if it doesn't go through I can just mail the checks back and everyone is all squared up.

Posted by: type11969 Feb 21 2005, 07:57 AM

how close, or should I say, how far, are we from having this group buy go through?

-Chris

Posted by: Jake Raby Feb 21 2005, 08:36 AM

I have sent out 35 invoices and received 8 checks as of today...
You tell me..

I don't personally see it happening but maybe you guys can come through after all..

Posted by: Dominic Feb 21 2005, 04:51 PM

I hope we can pull this off and get these rods made.
How many folks on this board have ordered a set ?
I ordered 2 sets for myself.

Posted by: rhodyguy Feb 21 2005, 05:22 PM

sent a check without an invoice (one set) on saturday. it seems a number of people here didn't recieve an invoice yet. next tuesday is the first, if that's the cutoff date some checks won't get there in time. it's too bad to see this fall by the wayside.

k

Posted by: Jake Raby Feb 21 2005, 06:05 PM

I just talked to the Mfr. They have given me till the 15th of next month to get the deal together!

Posted by: rhodyguy Feb 21 2005, 06:16 PM

start an exstension date thread and we'll keep it at the top.

k

Posted by: vsg914 Feb 21 2005, 06:24 PM

Jake, I put the check in the mailbox this morning. Guess it'll go out tommorrow instead.

Posted by: ablose58 Feb 21 2005, 09:07 PM

Jake, you said that you sent me an e-mail I never received it but I will send out my money tommorrow so you will have mine on time!!!!! AL

Posted by: sean_v8_914 Feb 22 2005, 02:26 AM

quit sniveling over a flippin pc of paper folks(invoice). I got the email, I sent the check. you either want them or you dont. Jake is a known entity 'round here. pony up I want some of those rods. I allready sold my 2.0 rods

Posted by: Jake Raby Feb 22 2005, 02:50 AM

Okay... All the invoices were mailed from engineadmin@aircooledtechnology.com earlier tonight.

I had a few of them bounce back. IF YOU DID NOT GET MY INVOICE EMAIL info@aircooledtechnology.com and let me know that yours did not come through. My product development computer got a serious virus and is down for the count!

Posted by: rhodyguy Feb 22 2005, 09:18 AM

i sent the email as asked and requested confirmation of reciept. did you recieve the email?

k

Posted by: rhodyguy Feb 22 2005, 12:25 PM

it's not about snivelling one bit. IT'S ABOUT A LACK OF COMMUNICATION!!!! IT'S ABOUT FOLLOWING DIRECTIONS AND THEN NOT KNOWING WHAT THE HELL IS GOING ON!!!

k

Posted by: Jake Raby Feb 22 2005, 01:46 PM

Yes, it has been confusing and thats my fault. Trying to make this happen in the very small amount of extra time I have is always the culprit.

We'll get it now- We have a cople of extra weeks now.

Posted by: vsg914 Feb 22 2005, 03:24 PM

My check is on the way as promised.

Posted by: splashfx Feb 22 2005, 04:37 PM

My check will be in the mail tomorrow.

Thanks Jake

Posted by: Bleyseng Feb 23 2005, 01:07 PM

This is confusing sooo what the drop dead date cuz this morning I went out and fed ex'd a check to you. Never got the invoice email either...

Whatever!<_<

Check will be there tomorrow

Geoff

Posted by: rhodyguy Feb 24 2005, 11:27 AM

i'm not even close to putting together an engine. but when i do, i hope to have a great set of lightened rods with arp hardware. this is a product to sit on. a worthy addition to the parts stash. and .

k

Posted by: Bleyseng Feb 24 2005, 11:28 AM

I plan on using mine instead on sitting on them. They are kind of hard and pokey.


Geoff

Posted by: Dominic Feb 26 2005, 08:28 AM

The New deadline is March 15th for all the checks to be in.

Posted by: anthony Feb 26 2005, 11:56 AM

Is there a count? How many more does jake need?

Posted by: Dominic Mar 2 2005, 12:23 PM

We now have another 2 weeks to get all of the funds to Jake......Just friggin Do it !!!

Posted by: Dominic Mar 2 2005, 05:19 PM