Posted by: Porschef May 14 2015, 08:07 AM
I want to remove them and haven't been able to locate replacements.
Any ideas?
Thanks,
Joe
Posted by: cary May 14 2015, 08:15 AM
Here's what Mark has.
http://shop.914rubber.com/914-Rocker-panel-rivets-set-of-12-2-extra-914RPR.htm
Posted by: Mueller May 14 2015, 08:18 AM
McMaster-Carr should have them as well...for the price 914rubber has them for that is great deal since you don't have to buy a box of a 100 or so.
Posted by: rick 918-S May 14 2015, 08:50 PM
QUOTE(cary @ May 14 2015, 09:15 AM)
Here's what Mark has.
http://shop.914rubber.com/914-Rocker-panel-rivets-set-of-12-2-extra-914RPR.htm
Are you asking for the black plastic ones or the metal rivets?
Posted by: rmital May 15 2015, 07:01 AM
QUOTE(rick 918-S @ May 14 2015, 10:50 PM)
QUOTE(cary @ May 14 2015, 09:15 AM)
Here's what Mark has.
http://shop.914rubber.com/914-Rocker-panel-rivets-set-of-12-2-extra-914RPR.htm
Are you asking for the black plastic ones or the metal rivets?
I sent Joe a bunch of the black plastic ones....hopefully they do the trick.
Posted by: boxstr May 15 2015, 05:51 PM
I have used the aluminum ones and touch them with a little black paint that you use on the rockers.
Craig at CAMP
Posted by: toolguy May 15 2015, 06:57 PM
QUOTE(Mueller @ May 14 2015, 07:18 AM)
McMaster-Carr should have them as well...for the price 914rubber has them for that is great deal since you don't have to buy a box of a 100 or so.
+++ for McMaster Carr if you want plastic with domed heads just like OE
Posted by: dudzy's914 May 21 2015, 06:24 PM
Is there any support for the rocket cover at the bottom so it does not flap in the wind? I have the spacers and rivets, anything else?
Posted by: JawjaPorsche May 21 2015, 07:08 PM
QUOTE(dudzy's914 @ May 21 2015, 08:24 PM)
Is there any support for the rocket cover at the bottom so it does not flap in the wind? I have the spacers and rivets, anything else?
There are 5 bolts at bottom. There are two screws at each end. The rocker is pretty stiff.