I plan on installing my new battery tray and hold down this week end but need to know what nut to weld to the bottom of the tray and what bolt will work the factory hold down
Best
-Robert
It's an M8 nut and bolt. Not sure the correct length of bolt.
Thanks, I will pick them up on the way home...
Best
-Robert
Would also be a good time to buy a Battery Mat to go under the Battery to absorb the Vented Battery Acid in the bottom of the tray. I also put one vertically between the back of the Battery and the Fender inner wall.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)