Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Spring pressure of Webcam's spring kits

Posted by: lonewolfe May 31 2015, 02:45 PM

Does anyone know what the over the nose spring pressure is for Webcam's single & dual valve spring kits? I called Webcam and the lady could only give me the seated pressure and install heights. Seems odd they couldn't provide this information. I surely can't be the first person to ask.

Do any of you have this info?

Posted by: colingreene May 31 2015, 03:27 PM

call the lady back and ask for someone in design they should be able to tell you.
Why do you need to know though.

Posted by: lonewolfe May 31 2015, 04:02 PM

QUOTE(colingreene @ May 31 2015, 02:27 PM)

call the lady back and ask for someone in design they should be able to tell you.
Why do you need to know though.

The guy rebuilding my heads and my custom cam grinder(Elgin) want to know.

Posted by: colingreene May 31 2015, 08:40 PM

Ah, i would say you should go web cam/lifters/springs.
Though they should be able to figure that out for you.

Posted by: Mark Henry May 31 2015, 09:12 PM

Most performance grinds I'd only go dual spring.
On my /4 in the bug, but I'm running Gene Berg type I duals, CrMo retainers, hardened keepers and steel shims.