Posted by: Geezer914 Jun 4 2015, 01:58 PM
What is the difference or advantage between a 1.5 ohm coil and using a 3.0 ohm coil with a Pertronix electronic ignition module?
Posted by: reharvey Jun 4 2015, 02:17 PM
QUOTE(Geezer914 @ Jun 4 2015, 02:58 PM)
What is the difference or advantage between a 1.5 ohm coil and using a 3.0 ohm coil with a Pertronix electronic ignition module?
For our 4cyl. cars Pertronix manual says 3.0 ohm only!
Posted by: worn Jun 4 2015, 02:49 PM
QUOTE(reharvey @ Jun 4 2015, 01:17 PM)
QUOTE(Geezer914 @ Jun 4 2015, 02:58 PM)
What is the difference or advantage between a 1.5 ohm coil and using a 3.0 ohm coil with a Pertronix electronic ignition module?
For our 4cyl. cars Pertronix manual says 3.0 ohm only!
Are the lower resistance ones for higher amperage output CD boxes like MSD? I know that when I had trouble with an MSD box the rep told me that the type of plug wire is important. So I bought some new ones and never put the thing back in.
Posted by: JimN73 Jun 4 2015, 02:53 PM
I don't know about MSD, but Mallory requires a 1.4 ohm coil or a 3 ohm coil and a resistor.
Find out before you hook things up. Frying an ignition module on the freeway is not fun, but is expensive.