Are pipe threads different than sae?
YES! NPT is tapered, SAE threads are not. The Cap'n
If you man NF and NC threads, yes they are different. NPT threads are tapered.
you want NPT......
yes, they are different, there is also a british pipe thread...
OSH or Craftsman should have the tap you need...
you'll need to pick up a 7/16 drill bit......
not sure how thick the casting is, but the "effective" thread length is .40, meaning, you don't want to tap too far in........
Thanks.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)