Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Geometry check

Posted by: thieuster Jun 24 2015, 07:24 AM

After lowering the front end of the car by an inch, the steering geometry needed a check as well. So first, I had to track down a specialist who would be able to do the 914's geo. The Dutch Porsche forum came up with the answer! A wheel and tire shop only 5 mins away from my house! I'd heared about them, but not in relation with Porsches.

Next thing I found out that I would need shims to adjust the rear wheels. But I decided "Who dares, wins" and went without shims. Just to hope for the best.

So I entered a shop that looked like an operating theatre! I was welcomed by Eric, the mechanic. Long story short: the car didn't need shims at the back (phewwww): the geo at the end was within limits.

At the front, things needed adjustment - off course. But that wasn't too hard. Within 45 mins I was out again and the steering feels a lot more secure! Total costs: 60 euros.

Things are getting better by the day.

(Tomorrow, a guy from the insurance company comes over for an appraisel report: he will determine the car's market value. I have done business with that man before. I also did the appraisal on my TR and Saab 96. In both cases, I was happy with the outcome. I'll let you know what the 'verdict' will be!)

Menno

Posted by: ConeDodger Jun 24 2015, 07:57 AM

Amazing how much difference a good alignment makes! smile.gif

Posted by: SirAndy Jun 24 2015, 12:25 PM

QUOTE(ConeDodger @ Jun 24 2015, 06:57 AM) *

Amazing how much difference a good alignment makes! smile.gif

agree.gif

Posted by: 76-914 Jun 24 2015, 06:57 PM

I like your steady approach, Menno. Five minutes or 5 hours; work on it every day till you have it done. Enjoy the Hell out of it. beerchug.gif Kent

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)