Hello,
Just wanted to introduce myself and to pick your (collective) brain. My name is Chuck and I live in Seattle, WA. I have been "battling" 914 lust for a couple of years now, off and on. Recently, I got a new job that came with 2 important things: a significant increase in salary and a much-abbreviated commute. These 2 factors will enable me to realize my dream of affordable German go-kart ownership.
Through Google research, I have learned that rust is a significant issue. I have familiarized myself with where to look for the red cancer, but what I'm looking for is other things to take into consideration. It seems like '73 is the "sweet spot" if one wants to keep his/her 914 stock/original. I have not ruled out a Subaru/Renegade swap. I am a welder/fabricator by trade, or was until 2 weeks ago. I'm totally comfortable with, albeit not really equipped for, building motor mounts and/or replacing rusty panels. Frankly, I'd rather do the former than the latter. I'm sure you understand.
Anyway, I'll keep this brief. Any advice or "school of hard knocks" type stuff you can offer will be greatly appreciated. For instance, spend $15k for a nice rust-free example and leave stock or buy a beater for $1k and pop in a WRX motor?
I've got a lot to learn. Thanks for any info you feel like donating!
CB
Buy the best car you can afford.
That's quite a nice intro- and you have identified what I consider to be the optimal year for a stock 914 purchase.
I guess it depends on what you seek power wise. If the stock 2.0 FI motor (great engine) is all you need, I would hunt for a stock '73 appearance group car and keep it as stock as possible.
However, if you seek to modify and attain 200 HP or more and do a Subaru swap, (another terrific motor) then I would look for a clean chassis with as little rust as possible and maybe no drivetrain. Projects pop up all the time on here and you can definitely stretch your dollar going that route. Then the nice thing is everything will be as you like it and done to the level you seek.
All in all, it is just a lot of fun and you will end up with a terrific car to drive regardless of the direction you choose.
Welcome, good luck in the hunt and have fun.
Memorize the restoration thread! Welcome.
Buy the best car you afford is the best advice. Personally, I think the 74 2.0L is the best example for a car to keep stock. Perhaps I am biased...
Actually, yeah - a '74 2.0 with the appearance group options definitely works too.
Way to many teeners have been modified, as far as I'm concerned, so I'd be looking for originality. Regardless, the best advice has already been given: buy the best one you can afford.
Being a welder is a good skill to have, but most people want to drive their 914. It seems like the Pac NW has people selling 914s for reasonable money every now and again. Figure out what you want, be patient, buy the color, motor, and year you want, and expect to pay a little more for it.
You can put in a WTB, but I've found that the shipping cost often eats at too much of your car budget.
Have fun and good luck!
buy the car Euro911 is selling, its really nice and well sorted.
It's a journey........since you have more time and money decide how you wnat to finish then work backwards to get where you want to be.
....ummm, good luck finding even a beater for 1K
Oh and
Welcome! A few of us are getting together This Tuesday at 7:00pm for a beer or two at big e ales if you care to join us and meet some of the PNW crew!
Jsaum
Looks like you already headed in the right direction.
Original versus mods...? Hmmm, another one of those topics likes FI vs carbs, politics, and religion.
Buy what you like, do with it what you want, and enjoy it.
But either way, I agree with spending money up front on the best car you can afford.
Welcome to the World!
A lot of knowledge and good guys up there in the PNW. They can steer you in the right direction.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)