Does anyone have pictures of a 1975 2.0 engine bay with Dtronic. Any and all pictures would be appreciated of stock engine! I am trying to figure out where all the hoses go and am having a tough time. Hard start/high idle seems to be running rich! Any help would be appreciated! Thank you in advance.
Diagram attached.
I have a 76 I think its the same as a 75.
The hoses are a bit different from the 74 as shown in the diagram in the post above. There is no anti flash back valve or hose to the head, There is a hose from the fan housing to the evaporative filter
http://s1300.photobucket.com/user/DavidGbgSweden/media/Picture%20002_zpswnieazg3.jpg.html
That diagram is gold for getting the hoses right.
If it is still running rich after getting the hoses set, use the last section of this as a troubleshooting guide (My car runs rich and I don't know why"):
http://members.rennlist.com/pbanders/DJetParts.htm#troubleshoot
If you can't get the idle lowered with the air bleed screw, you may still have a vacuum leak.
Good luck and keep us posted.
David, do you have vented heads?
Thanks for all the replys guys! I still could use some more photos! That 1976 looks good and clean!! But its a tad different then my 75. But it does help!!!!! I have the Haynes manual and all that but nothing that gives a definate this goes here that goes there. then of course I just found a house which goes to who knows. I can get the car started warm but when cold its nots happening without starter fluid!!!
I never realized that the 75-76 2.0 heads were not vented. That's not documented anywhere in factory literature that I know of. Good to know. We need a 75-76 hose diagram.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)