Ok, Just had the car shipped down from CAMP 914. 72 914 with a tail slapper and an injected 1.7. Has a few goodies on it. Welt swaybar, koni shocks in the rear (one looks a little leaky), short shifter, recent paint, air horns and on and on. I am happy as hell! It needs a few little things, but definately worth the asking price and shipping to me. Thanks Craig!
Attached image(s)
mo
Attached image(s)
mo
Attached image(s)
Last picture shows the bumper flange on the drivers side, that quarter had been replaced and they dind't remove the flange. Hard to tell unless you are looking for it.
I like the horn, Travis.
John
AWESOME!! Too cool! Hope you love it!
Let us know when you get it!
Cole
mo
bah, forgot the pics
Attached image(s)
mo
Attached image(s)
mo
Attached image(s)
did I just double post a pic'y?
Attached image(s)
mo
Attached image(s)
mo
Attached image(s)
su'mo
Attached image(s)
This shows the different shade of paint, Saab Platana grey over the original silver, seems subtle enough
Attached image(s)
lil'mo
Attached image(s)
mo
Attached image(s)
Trunk lid, you can see the 3rd brake light. I wouldn't put one on the car, but it's not bad so I guess it has grown on me. You can see the rubber plugs where the fiero spoiler once was. Maybe I can make a coffee table out of it, or a large spoon for queso dip..
Attached image(s)
mo, I think I dig the emblem on the seatback. The pressboard is a little flimsy, I have a spare or two!
Attached image(s)
works tall, shifts short..
Attached image(s)
mo
Attached image(s)
mo
whoops! I farted
Attached image(s)
late model valence and early model bursch muffler. Gonna have to cut and weld on a new pipe. Maybe I'll go folgers, or MJB bumpa bumpa bump bump, ba bumpa bump bump..
Attached image(s)
Awesome!
Now DON'T take it apart (at least not before WCC).
Oh yeah, rear bumper is from a 74 too (pic above)
Attached image(s)
Enkei wheels and red calipers. Calipers in the rear are sticky, gonna have to dig into that first. Could be crusty cables or a rebuild is in order. Have spare calipers, so no problemo'
Attached image(s)
I have to cut out the rear trunk panel and weld in a replacement. That is the only rust on the car (besides the tiny surface stuff here and there. Had to practice so I made new digs for the ladies.. It's race bred with an 1/8" lexan pan for the floor. They are just hanging out by the pool (cant see it, but I will post pictures of them in water wings later)
Attached image(s)
You know I coulnd't post without doing something screwy, so here's the ladies. I hope Zois and slits don't get too worked up.
Attached image(s)
Cole, it came saturday night. Drove it around the block twice and then hit the Targa-Aide run, hung out for a little bit and headed home to finish moving, sticky caliper and not driving the car enough first made me gunshy on the run. Fun all the same, it drives good, runs good, looks good. The car isn't perfect, but that is comensurate for the price. I feel like I made out well!
Joe, I'll do my best not to have a pocket full of car parts and a bus pass on the WCC. Whoops gotta sign up!
Soooo Travis...you gonna...........use your cock for fighting???? Someone had to do it
Nice car "T" Craig is a straight shooter.
haHA! these are just the ladies, but I can pickemup backwards and squeeze out a couple eggy felch mortars.. fooom fooom
Thanks Rick, I am very, very happy with the car. Craig outdid himself all the way through. All for 3.5 kilobucks, I have enough left over for chicken feed
QUOTE (Travis Neff @ Feb 28 2005, 08:11 PM) |
haHA! these are just the ladies, but I can pickemup backwards and squeeze out a couple eggy felch mortars.. fooom fooom |
few more
Attached image(s)
mo
Attached image(s)
asdf
Attached image(s)
asdfsdf
Attached image(s)
qwet
Attached image(s)
asdfaf
Attached image(s)
asdf
Attached image(s)
this will need a little
Attached image(s)
Nice car! I've visited Craig @ Camp914 over the weekend. Picked up a passanger side mirror & got lots of good advice. Craig is a 1st class guy & runs a top shelf business. Enjoy your "New" '72.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)