Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Separating headlight motor from body

Posted by: boxsterfan Sep 12 2015, 10:01 PM

How do these pieces come apart? I can't seem to get the lever off which will then allow me to take the headlight motor out.




Attached thumbnail(s)
Attached Image

Posted by: stevegm Sep 12 2015, 10:11 PM

Once the nut is off (as it is in this picture) you can just pry the arm off with a screw driver behind it. It is normally tight. But, it will come off. Then you can take the motor out.

Posted by: rhodyguy Sep 13 2015, 09:00 AM

Index the position the arm should be in.

Posted by: porschetub Sep 13 2015, 12:44 PM

QUOTE(rhodyguy @ Sep 14 2015, 03:00 AM) *

Index the position the arm should be in.


+2 on that,the PO didn't do it on my car and it caused me some grief setting the height on one of them.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)