Printable Version of Topic
914World.com _ 914World Garage _ New, Original T4 Engine Sticker
Posted by: Tom_T Oct 6 2015, 06:36 PM
Well shouldn't the 1.7 & 2.0 feature the D-jet EFI, & 1.8 the L-jet - or at least a generic EFI - & not 2 BBL Carbs??
you may also want to look at doing the 2056-2.7L carbed options for the more adventurous T-IV bore/stroke guys out there.
Tom
///////
Posted by: BuddyV Oct 6 2015, 07:18 PM
I like them!
Posted by: griffindoug Oct 6 2015, 07:37 PM
QUOTE(BuddyV @ Oct 6 2015, 08:18 PM)
I like them!
I'd buy the 2056.
Posted by: somd914 Oct 6 2015, 07:44 PM
I like, but just a thought, perhaps to continue in the theme, how about 2.1 instead of 2056?
Granted in our community we all refer to it as a 2056 rather than rounding up, but just a thought... With that said, I'd buy a 2056 or a 2.1...
Posted by: Mueller Oct 6 2015, 08:01 PM
QUOTE(somd914 @ Oct 6 2015, 06:44 PM)
I like, but just a thought, perhaps to continue in the theme, how about 2.1 instead of 2056?
Granted in our community we all refer to it as a 2056 rather than rounding up, but just a thought... With that said, I'd buy a 2056 or a 2.1...
^this, too closely resembles a year in the future....people would say "what is happening in 2056?"
Posted by: 914-300Hemi Oct 6 2015, 08:25 PM
I would buy the 2056
Posted by: BuddyV Oct 6 2015, 08:40 PM
I would/will buy the 2.0 and the 2056
Posted by: Mark Henry Oct 6 2015, 09:45 PM
QUOTE(Tom_T @ Oct 6 2015, 08:36 PM)
Well shouldn't the 1.7 & 2.0 feature the D-jet EFI, & 1.8 the L-jet - or at least a generic EFI - & not 2 BBL Carbs??
you may also want to look at doing the 2056-2.7L carbed options for the more adventurous T-IV bore/stroke guys out there.
Tom
///////
2.6
Posted by: aircooledtechguy Oct 6 2015, 10:44 PM
Let me know if you decide to make any 2,3 versions.
Posted by: RobW Oct 7 2015, 07:16 AM
Nice job!
Posted by: era vulgaris Oct 7 2015, 07:30 AM
QUOTE(Mueller @ Oct 6 2015, 10:01 PM)
^this, too closely resembles a year in the future....people would say "what is happening in 2056?"
The end of the world, as predicted in the book of Haynes. But lo, rejoice all ye brothers in the knowledge that re-assembly is but merely the opposite of dis-assembly.
Posted by: Alapone Oct 7 2015, 07:56 AM
id be in for a 2.0l carbs or djet. let me know
Posted by: mm911 Oct 17 2015, 04:01 PM
QUOTE(7TPorsh @ Oct 6 2015, 07:27 PM)
I've been working on a design for awhile and am close to finishing up. My plans are to offer a few different products with this design. T-Shirts are for sure but the main focus was an inside window sticker....similar to the early 6 cylinder decals on the 911's.
Finalizing with the printer at the moment so if I can get a rough idea of what people are interested in ( if at all ) I'll know what kinds of quantities to print.
These will be Black, Red and Matte Silver (nicer but a little more expensive than doing it in gray) just like the originals and stick on the inside of a window....thinking about 3.5"x3.5".
Cost will be about $12 packed and delivered; $20 for two.
Thinking this one will be back adhesive to stick on the outside of a window, engine tin, car...
What think y'all?
I would buy a 2,3
Posted by: anderssj Oct 17 2015, 06:18 PM
Want this! maybe 2 . . . .
Thanks for doing this!
Oh, and what shirt color(s)?
Posted by: boxsterfan Oct 17 2015, 09:51 PM
I could be interested in a 2270 sticker.
Posted by: Hank914 Oct 17 2015, 09:56 PM
QUOTE(Mueller @ Oct 6 2015, 07:01 PM)
QUOTE(somd914 @ Oct 6 2015, 06:44 PM)
I like, but just a thought, perhaps to continue in the theme, how about 2.1 instead of 2056?
Granted in our community we all refer to it as a 2056 rather than rounding up, but just a thought... With that said, I'd buy a 2056 or a 2.1...
^this, too closely resembles a year in the future....people would say "what is happening in 2056?"
Or a song.... In the year 2525, will man still be alive?....
Posted by: euro911 Oct 18 2015, 04:03 PM
I vote for a 2.1L instead of 2056 as well, since a 2.0L is actually 1971cc
Posted by: AndyB Oct 19 2015, 05:31 AM
I would be in for a 2.2
Posted by: Marty Yeoman Oct 19 2015, 10:14 AM
QUOTE(euro911 @ Oct 18 2015, 03:03 PM)
I vote for a 2.1L instead of 2056 as well, since a 2.0L is actually 1971cc
I'd be in for a 2.1L.
Marty
Posted by: Jake Raby Oct 19 2015, 10:36 AM
I'd like one that just says "Big"
Posted by: SirAndy Oct 19 2015, 11:33 AM
Add a cylinder, ditch the carbs and put a 3.6 on it and i'll buy one ...
Posted by: RobW Oct 19 2015, 11:34 AM
QUOTE(SirAndy @ Oct 19 2015, 10:33 AM)
Add a cylinder, ditch the carbs and put a 3.6 on it and i'll buy one ...
With a mohawk in the middle too...
Posted by: euro911 Oct 19 2015, 11:41 AM
Posted by: SLITS Oct 19 2015, 01:43 PM
QUOTE(RobW @ Oct 19 2015, 10:34 AM)
QUOTE(SirAndy @ Oct 19 2015, 10:33 AM)
Add a cylinder, ditch the carbs and put a 3.6 on it and i'll buy one ...
With a mohawk in the middle too...
You need to specify the color of the Mohawk ..........
Posted by: 7TPorsh Oct 19 2015, 04:17 PM
QUOTE(SirAndy @ Oct 19 2015, 10:33 AM)
Add a cylinder, ditch the carbs and put a 3.6 on it and i'll buy one ...
The 6 cylinder ones are out there; wanted to do something for those who are running a couple cylinders short.
What's does a d-jet / l-jet look like from this view?
Posted by: Maltese Falcon Oct 19 2015, 04:30 PM
MSDS 6 cyl turbo emblem (chrome mylar) from the '80s
Posted by: lonewolfe Oct 19 2015, 05:15 PM
QUOTE(aircooledtechguy @ Oct 6 2015, 09:44 PM)
Let me know if you decide to make any 2,3 versions.
I second the 2.3 request!
Posted by: lonewolfe Oct 21 2015, 01:48 PM
Awesome!
Posted by: euro911 Oct 21 2015, 03:06 PM
I'm definitely in for (1) 1,7L and (2) 2,1L, Gary
Posted by: worn Oct 21 2015, 05:09 PM
QUOTE(7TPorsh @ Oct 6 2015, 05:27 PM)
I've been working on a design for awhile and am close to finishing up. My plans are to offer a few different products with this design. T-Shirts are for sure but the main focus was an inside window sticker....similar to the early 6 cylinder decals on the 911's.
Finalizing with the printer at the moment so if I can get a rough idea of what people are interested in ( if at all ) I'll know what kinds of quantities to print.
What think y'all?
I would be interested in a couple but don't run carbs on my German cars. My 2056 would have to be shown with the Bosch injection. Lord knows it has taken enough tinkering.
Posted by: 7TPorsh Nov 3 2015, 04:52 PM
Still working out the last details with the printer. Trying to get an idea of what designs to order. More 2.0 and less 2.3. Get your oddball requests in now! 3" x 3" stickers will be color printed on clear and have adhesive on the back side; great for the outside of the back window...or any light colored surface.
Notice the slight change to the 2056 design?
A handful of sticker designs will be available soon and will be listed on my website for an easy transaction. I will be handling packing/shipping myself - no vendor on these.
In the meantime I have loaded these designs at my T Shirt vendor (914SWAG Store). You can easily buy one or more t shirts in various designs and colors.....Mix & Match!
I am using Gildan T Shirts as they are "true" T shirts in my opinion. Lightweight and they breathe. The Hanes beefy shirts don't breathe and tend to be hot.
White shirts are $14.40 and colored shirts are $18; choose from over 50 colors! Vendor shipping is a flat $5.
http://www.galloree.com/The-914-SWAG-Store-1138.htm
p.s.: Hey Mike, didn't forget you! I'll be adding the 2.3 this evening!
Posted by: euro911 Nov 4 2015, 02:30 AM
Gary, did you decide to do the 2,1 decals, or go with the 2056cc instead?
Personally, I would prefer (2) of the 2,1 decals, as it does follow the theme of the other displacements ...
Also in for (1) 2,1 shirt (large)
Posted by: Rleog Nov 4 2015, 05:14 AM
I'd like one of the 2.3 stickers. Thanks
Posted by: 7TPorsh Nov 4 2015, 09:46 AM
QUOTE(euro911 @ Nov 4 2015, 01:30 AM)
Gary, did you decide to do the
2,1 decals, or go with the
2056cc instead?
Personally, I would prefer (2) of the
2,1 decals, as it does follow the theme of the other displacements ...
Also in for (1)
2,1 shirt (large)
Hey Mark, I will have both 2.1 AND 2056cc. I decided to add the cc to 2056 so it didn't seem like a doomsday date.
Shirts are available now for orders here: http://www.galloree.com/The-914-SWAG-Store-1138.htm
Posted by: euro911 Nov 4 2015, 11:36 AM
If I make it to 2056, I'll be 102 years old
Posted by: AndyB Nov 5 2015, 08:19 AM
I would be in for a couple of t-shirts and stickers in the 2,2 veriaty.
Andy
Posted by: 7TPorsh Nov 5 2015, 02:53 PM
QUOTE(AndyB @ Nov 5 2015, 06:19 AM)
I would be in for a couple of t-shirts and stickers in the 2,2 veriaty.
Andy
Shirts are now available at the 914SWAG Store!
Posted by: 7TPorsh Nov 7 2015, 11:30 AM
Working on the injected design. Want to finish this before i do up the sticker buy. What say you?
Posted by: 7TPorsh Nov 9 2015, 02:51 PM
Injected T Shirts now available too! All colors; no group buy for T Shirts!
Posted by: 7TPorsh Jun 17 2016, 11:29 PM
QUOTE(SirAndy @ Oct 19 2015, 10:33 AM)
Add a cylinder, ditch the carbs and put a 3.6 on it and i'll buy one ...
like this Andy?
Posted by: 7TPorsh Jun 23 2016, 10:28 AM
Ok hot off the press. New custom displacements for flat 4. These are available now but not listed on my site yet. PM me for payment instructions.
All stickers for 914world members are $6 ea. delivered in the US of A.
Posted by: 7TPorsh Jun 23 2016, 10:29 AM
Posted by: 7TPorsh Jun 23 2016, 10:29 AM
Posted by: 2mAn Jun 23 2016, 10:56 AM
these are awesome
Posted by: green914 Jun 23 2016, 01:08 PM
I would be interested in a 2.0 T-shirt.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)