Is there a thread discussing the method to press in new bearings in the trailing arms.
Thank Brian
Video on pmbperformance.com
Check out the video, very good info.
I forgot the bearing for about 2 weeks in the freezer before I installed the bearing.
It just took some light taps with a plastic hammer and it slid right in..
Check out the video, very good info.
I forgot the bearing for about 2 weeks in the freezer before I installed the bearing.
It just took some light taps with a plastic hammer and it slid right in..
Check out the video, very good info.
I forgot the bearing for about 2 weeks in the freezer before I installed the bearing.
It just took some light taps with a plastic hammer and it slid right in..
Check out the video, very good info.
I forgot the bearing for about 2 weeks in the freezer before I installed the bearing.
It just took some light taps with a plastic hammer and it slid right in..
Sorry about the multi posts. I guess you get the message now. :-)
Thanks for the info!
Brian
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)