Not really what you're asking for, but Tangerine Racing has a kit for $325 which I really wish I had seen before starting to build my own since the time saved would have been well worth it IMHO. It's on the lower right side of this page.
http://www.tangerineracing.com/tools.htm
Posted by: mb911 Nov 23 2015, 01:21 PM
QUOTE(jd74914 @ Nov 23 2015, 09:56 AM)
Not really what you're asking for, but Tangerine Racing has a kit for $325 which I really wish I had seen before starting to build my own since the time saved would have been well worth it IMHO. It's on the lower right side of this page.
http://www.tangerineracing.com/tools.htm
Do you have the quick bumper dimensions? I don't have my bumpers off yet..thanks
Posted by: jd74914 Nov 23 2015, 02:01 PM
QUOTE(mb911 @ Nov 23 2015, 02:21 PM)
QUOTE(jd74914 @ Nov 23 2015, 09:56 AM)
Not really what you're asking for, but Tangerine Racing has a kit for $325 which I really wish I had seen before starting to build my own since the time saved would have been well worth it IMHO. It's on the lower right side of this page.
http://www.tangerineracing.com/tools.htm
Do you have the quick bumper dimensions? I don't have my bumpers off yet..thanks
Sorry, not at the moment (my drawings are at my parent's house with the car).
But i spent close to what tangerine is costing in materials. If their kit is pre cut, it IS a no brainier!
Chris told me it's basically just a welding project. That's when I started lamenting not knowing about it since my materials cost is >50% of the way there.
Posted by: John Nov 23 2015, 10:24 PM
I don't know if a PDF posts here, but I have posted this before. This is the sketch I made when I built mine. I worked at a place that fabricated a lot of steel components and they had lots of scraps available. The plans aren't complete by any means, but it is what I used when I built mine. It's basically two tall engine stands tied together and arms that bolt on where the bumpers would attach.
I used the bluesky plans, I took the material list to local welding shop and had him cut the materials. $300.00 out the door. it would have been an additional 700.00 if he did the welding.