Is there a special clamp made for the VDO oil pressure sender ? It's about 1.6" in diameter.
You can use something like this (different diameter though):
http://www.ebay.com/itm/COL2809Z1-Clamp-OD-1-3-4-In-1-2-In-W-Cushion-PK-10-/321476708508
This is what I used from the hardware store. Fit is just right. I've since painted it black. I think it cost a couple bucks at Ace.
Dont have a picture. But mine is on a stand off piece. Then clamped to the sender. The stand off bolts to the fan housing.
IIRC it needs to be metal on metal for the ground?
I believe it's made for clamping overhead iron pipe. 1-1/2" I think. Got it at Ace hardware.
Yep, its a pipe clamp for hanging pipe overhead, often with threaded rod .
Hi Jim,
Here is the part at Homedepot: http://www.homedepot.com/p/Halex-1-1-2-in-Steel-Conduit-and-Pipe-Hanger-67840/100146334
Happy holidays!
Darryl
That's exactly what I have. Make sure the size is correct...I'm thinking 1-1/2 may be small. They come in many sizes. I used a self locking nut on mine
Went over to HD and found them.
Thanks
That is an electrical conduit clamp.
I used a grease gun hose from FLAPS. I wasn't crazy about "threading" it into the case (not exactly the same threads) but it's a tried and proven method by several world gurus.
Pick your size. Grainger has everything...
http://www.grainger.com/product/B-LINE-by-Eaton-Conduit-Clamp-4RHZ6
thanks for the line info... I'll look into it because that sender really does not fit well next to the distributor
Update: Went to Home Depot. The first guy I asked didn't know; second guy did know. They don't carry the Halex 46840, but have ACC Conduit Hangers in 3 or 4 sizes. They are under $1.00 so I bought three different ones. The bases of one was a little flatter and better suited to mounting.
I'll shoot a pic and post later.
In any case they have them...
That's why I shop at Ace Hardware. At least at my local Ace, employees actually know what they have and are available and happy to help. Plus I get 10% military discount and a free bag of popcorn...I'm happy. Good luck
Got it in today, those clamps are perfect.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)