So I saw a set of Konig seats in a 914 and they looked perfect (the car Eric just finished) My wife saw them and recounted me with the trouble she had going around corners fast in our last Six in stock seats. She saw the Konigs and loved them. So I am considering upgrading to a GT style seat with some lateral support. But I would hope to be able to cover them in the stock looking leather to match the rest of the interior. What you all thinking?
The answer doesn't really matter. You wont drive it...
I like the GTS STs or LeMans seats…….
Slow down.
Renegade
My interior was at least partially recovered in leather in years past. Whatever seats I end up with will go to the upholstery shop with the rest of the interior to make sure it all matches and is nice and straight and tight. I want to use the later model back pad and keep it looking as stock as possible given the replacement seats. The passenger seat will be adjustable too. At least that is what I am thinking at this point.
Oh, I definitely plan on driving my Six.
We sell these now. I love them. They're going in the off-road project:
They are marketed here as GTS seats, Le Mans for 914.
I have had a LeMans GTS seat in my car for 10 years. IMHO they are fantastic.
Attached image(s)
I also have GTS LeMans seats. I like them a lot.
Attached image(s)
+1 on Renegade unless you're a husky fella
Thanks Dominic-
Sounds like a plan. I will get a hold of you after the holidays to get a chance to meet and have a seat to see how they fit.
Thanks so much for the offer.
Michael
I have owned both GTS lemans and konig. Konig was too tight on my 32" ass so I sold them. Even the lemans is a snug fit, but I am quite happy with them. Around town I use a stock seat. For autocross or spirited driving, I put in the GTS lemans seat. Both look great and fit the backpad nicely. I think the konig was better built than the GTS lemans leather seat I have. I have had problems with the GTS and stock seat mounts. The bottom of the seat is hitting the seat mount cross brace. I had to use longer screws and spacers to get it to clear.
I recall back when 914s came out, folks would remove the seat bottom cushion to get a more "bucket" feel. Then he bought a Sheel (looks like the current Koenig seats) and that worked better but wasn't class legal for certain events.
Depending on size of driver and/or passenger try to find one to sit in first. Also note that if one is of slight dimension, the lap part of the seat belt may not rest closely as the bolster blocks the belt.
Very very few of the stock seats were ever leather. Just about all were vinyl, or vinyl with cloth inserts.
If you want the seat to look as close to stock as possible, use the stock seat. And remove the bottom cushion, as Dave above said. Especially for someone wide across the seating area, that provides a good bit of lateral support. You can even cut a thin cushion out of closed-cell foam or some such, and wrap it in basketweave vinyl to match the upper insert.
--DD
Looks like the same GTS Classic Lemans seats in my 914. I increased the seat angle for more arm-to-steering wheel room. This prevented regular headrest travel and thus the custom headrest mounts on the harness bar.
Sherwood
If you want the factory look, how about a factory seat with built up bolsters? Insert material of your choice. I went with black tweed.
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)