Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ front rubber bumper spacer
Posted by: 9fourteen14 Dec 5 2015, 11:36 AM
How do i remove the front rubber bumper spacer off the front bumper.
it feels and looks like there is a cone shape that is holding it on the bumper.
see picture below
thanx a bunch
Posted by: tweet Dec 5 2015, 11:40 AM
It is held on with two flared rubber plugs that are cast as part of the spacer itself. Most of the time they will break off when you remove them. You could try to compress them with some needle nose pliers and push them through. Or, just leave them in place and work around them.
Posted by: 9fourteen14 Dec 5 2015, 12:12 PM
QUOTE(tweet @ Dec 5 2015, 12:40 PM) 
It is held on with two flared rubber plugs that are cast as part of the spacer itself. Most of the time they will break off when you remove them. You could try to compress them with some needle nose pliers and push them through. Or, just leave them in place and work around them.
hey Tweet
I am going to have the bumper powder coated so need to take them off
thanx for the tip and interest.
I really do appreciate it
Posted by: Mikey914 Dec 5 2015, 12:26 PM
Glycerin - Lube it up they'll pop right out.
Posted by: 9fourteen14 Dec 5 2015, 03:12 PM
QUOTE(Mikey914 @ Dec 5 2015, 01:26 PM)
Glycerin - Lube it up they'll pop right out.
awesome it worked
thanx so much MIKEY
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)