Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Unmarked bag ? Found another item #3

Posted by: cary Dec 8 2015, 11:48 AM

I finally decided to unpack the box of bags from my rustoration. This is the only unmarked bag. What did they come from or out off ? I'm drawing a blank.
Looks like the stud snapped off on picture #2.

Attached Image

Posted by: tweet Dec 8 2015, 12:00 PM

look like clips and screws that hold down the exterior aluminum trim around the sail panel, but the large one has a broken stud

Posted by: boxstr Dec 8 2015, 12:06 PM

The clips are for the trim piece across the targa bar, and the piece with the b Rosen stud is from the trim piece that goes down the back part of the targa bar..
Craig at CAMP

Posted by: cary Dec 8 2015, 09:47 PM

Here's the other item I found today.

Attached Image

Posted by: PanelBilly Dec 8 2015, 10:32 PM

QUOTE(cary @ Dec 8 2015, 07:47 PM)

Here's the other item I found today.

Attached Image

Backer plate for engine cover lock. Easy to leave off when putting the car back together

Posted by: cary Dec 8 2015, 11:11 PM

I wonder why I didn't put it in that bag? Thanks.

Posted by: cary Dec 8 2015, 11:12 PM

QUOTE(boxstr @ Dec 8 2015, 10:06 AM)

The clips are for the trim piece across the targa bar, and the piece with the b Rosen stud is from the trim piece that goes down the back part of the targa bar..
Craig at CAMP

Thanks Craig

Posted by: cary Dec 16 2015, 07:48 AM

I found one more item.
I'm thinking a strut pin. But the Bilstein ones are quite a bit bigger.

Attached Image

Posted by: 76-914 Dec 16 2015, 08:27 AM

Ball joint bolt

Posted by: cary Dec 16 2015, 09:04 AM

Must have come out of the white car ...................
Entire front end is laying on the shelf.

Thanks ..................

Posted by: stugray Dec 16 2015, 09:19 AM

QUOTE(PanelBilly @ Dec 8 2015, 09:32 PM)

QUOTE(cary @ Dec 8 2015, 07:47 PM)

Here's the other item I found today.

Attached Image

Backer plate for engine cover lock. Easy to leave off when putting the car back together

Are you sure it's not the clutch stop plate that goes on the pedal board?

Posted by: RobW Dec 16 2015, 09:25 AM

QUOTE(stugray @ Dec 16 2015, 07:19 AM)

QUOTE(PanelBilly @ Dec 8 2015, 09:32 PM)

QUOTE(cary @ Dec 8 2015, 07:47 PM)

Here's the other item I found today.

Attached Image

Backer plate for engine cover lock. Easy to leave off when putting the car back together

Are you sure it's not the clutch stop plate that goes on the pedal board?

No, its threaded. Engine lid lock backing plate for sure...