Posted by: KELTY360 Jan 2 2016, 11:39 AM
I just need 12 Schnorr washers for my Syncro Westy CVs. They're the same size as 914....M8, I believe.
Posted by: Amphicar770 Jan 2 2016, 11:58 AM
QUOTE(KELTY360 @ Jan 2 2016, 12:39 PM)
I just need 12 Schorr washers for my Syncro Westy CVs. They're the same size as 914....M8, I believe.
http://www.ebay.com/itm/Porsche-914-Schnorr-Washers-for-CV-Joint-Axle-Bolts-New-PK-of-16-Genuine-/111859300483?hash=item1a0b557883:g:vd0AAMXQNo5TaV0g&vxp=mtr
Posted by: KELTY360 Jan 2 2016, 01:03 PM
QUOTE(Amphicar770 @ Jan 2 2016, 09:58 AM)
QUOTE(KELTY360 @ Jan 2 2016, 12:39 PM)
I just need 12 Schorr washers for my Syncro Westy CVs. They're the same size as 914....M8, I believe.
http://www.ebay.com/itm/Porsche-914-Schnorr-Washers-for-CV-Joint-Axle-Bolts-New-PK-of-16-Genuine-/111859300483?hash=item1a0b557883:g:vd0AAMXQNo5TaV0g&vxp=mtr
Thanks, but that vendor isn't exactly a friend of the 914World community.
Posted by: Dion Jan 2 2016, 01:15 PM
From Pelican forum:
EMPI # 875081 and M8 Schnorr (serrated Belleville) washers from McMaster-Carr are installed on 84 M8 100mm CV.
EMPI # 875081 was $1.50 a piece.
Schnorr was a little under $10 per a bag of 100 pieces.
Cheers, Dion
Posted by: raynekat Jan 2 2016, 02:08 PM
Our local hardware store carries these I believe (Portland, OR).
Just not sure of the sizes.
Posted by: rhodyguy Jan 2 2016, 02:44 PM
Tacoma screw products? Or save fuel and time and buy 100.
Posted by: Amphicar770 Jan 2 2016, 02:50 PM
QUOTE(KELTY360 @ Jan 2 2016, 02:03 PM)
Thanks, but that vendor isn't exactly a friend of the 914World community.
No worries, was not even looking at who the seller is.
I may have a whole box of these on the shelf. If, (and that may be a big If), I can find them I will PM you and can send a few your way at no cost.
Posted by: KELTY360 Jan 2 2016, 03:12 PM
QUOTE(Amphicar770 @ Jan 2 2016, 12:50 PM)
QUOTE(KELTY360 @ Jan 2 2016, 02:03 PM)
Thanks, but that vendor isn't exactly a friend of the 914World community.
No worries, was not even looking at who the seller is.
I may have a whole box of these on the shelf. If, (and that may be a big If), I can find them I will PM you and can send a few your way at no cost.
Thanks. Let me know.
Posted by: toolguy Jan 2 2016, 03:19 PM
McMaster Carr 100 for $11.00
http://www.mcmaster.com/#serrated-lock-washers/=10iejjy
Posted by: Mikey914 Jan 2 2016, 03:23 PM
Bringing in these to add to the nuts and bolts section. Will be .20 each. Now that we us reg mail shipping will only be a buck or two.
Posted by: KELTY360 Jan 3 2016, 12:25 PM
Ordered from PMB. Thanks for all the input.