Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ door end caps

Posted by: 23e Heure Jan 11 2016, 09:19 AM

Both my doors are missing a seal / trim.

Car is a 74 build. The trailing top corner of the driver's door looks like this:

IPB Image ]

Do I need:
A) Pair of these:http://shop.914rubber.com/914-Early-door-end-caps-914EDEC.htm
B) Pair of these: http://shop.914rubber.com/914-Late-door-end-cap-set-left-and-right-914LDEC.htm
C) Pair of these:http://914er-shop.de/en/rubber-plastic/end-cap-for-door-shaft-seal-73-76-right
D) Something else?

Thanks!

Posted by: LowBridge Jan 11 2016, 09:29 AM

I have a 75 and used "B" with Marks recommendation and they fit like a glove

Posted by: rhodyguy Jan 11 2016, 09:51 AM

Order new outer rubber scraper/seals too. Your's will prob be too short and the end caps would need to be removed to install them. As you're in the UK make a comprehensive list of seals and order them all at the same time. Buying and shipping items individually will blow up your budget. There's going to be a lot of little items as well as the big ones. WOW! 45 eu is quite dear for a single end cap.

Other items? The 2 seals for each door/inner fuzzy strips/ triangle Windows, the 2 round pieces for the holes in the door jams, vert and horizontal window seals, side mirror base seals, the ones for the door handles, boot and bonnet seals, various seals for lights and lenses, fender to cowl....the list grows quickly. What kind of condition is your carpet set in? I'm here to help you spend your money.

Posted by: 914Sixer Jan 11 2016, 06:26 PM

914Rubber.com

Posted by: Mikey914 Jan 12 2016, 12:44 PM

The hole is actually desired to use the screw to hold the "flap" of the door end cap.

Yes you more than likely would want to replace the rear fuzzies on the door track as the other flap is secured in there with the screw that holds it.

Posted by: Mikey914 Jan 12 2016, 12:48 PM

The outer scraper you have looks a little strange. It looks like the aluminum track that holds the scraper and the inner fuzzy is missing and a generic seal was shoved in there.

I do make the metal tracks if you need them $38 a set. Not listed on the website as they are a little labor intensive to make and I have yet to get enough back stock to list them.

Please post some more picks of your set up it looks interesting.