Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ eBay Fiberglass parts

Posted by: nein14 Jan 14 2016, 07:10 AM

Anyone know if the person that sells fiberglass GT parts on eBay is a member here

Posted by: nein14 Jan 14 2016, 10:19 AM

Anybody know eBay seller zero-kewl914

Posted by: Mr. Olympic Blue 2 You Jan 14 2016, 10:30 AM

That is QRS fiberglass (Jeff) ...I found him difficult to get ahold of thru his website and phone so I contacted him thru his ebay account.

Great quality stuff but like many manufacturers working out of their home you may have to ask twice for a tracking # and plan your order ahead of time if you are on a schedule.

http://www.qrsfiberglass.com/

Andrew

Posted by: Mike Bellis Jan 14 2016, 02:53 PM

I've ordered from QRS and AIR. I think the quality from AIR is slightly better and the parts are thicker. The GT bumper I got from QRS needed material added so the top edge would not be so flimsy. Finish gel coat on both was good. I also had to trim the top edge of the bumper to match the hood line curve. 3/4" on one side down to 0" on the other.

Posted by: nein14 Jan 14 2016, 04:47 PM

Thanks I ordered a GT front valance over a week ago on eBay from him and have sent messages to see if it shipped yet but no response

Posted by: shoguneagle Jan 14 2016, 06:44 PM

I have one I ordered from him and it does take a little time; via evilbay. Have not put it on yet but will have to do some cutting, etc. to make it fit. Quality appears to be there.

Posted by: lonewolfe Jan 14 2016, 07:35 PM

I ordered a GT front valance from Jeff last month thru Ebay. I ordered the model for a narrow body car and he sent me one for a flared car by mistake. After seeing I received the wrong valance I also saw that it was pretty thin and light. When I set up the exchange I asked if the correct valance could be beefed up since this is for a street car instead of a race car. Jeff obliged and sent me the correct valance and it was indeed beefed up over the original valance. Jeff is a really nice guy and makes nice products. I also ordered an oil cooler shroud from him. As with most fiberglass parts, some trimming will probably be required for fitment.

I'm not familiar with AIR and their parts. Does anyone have an link to their website? I'd like to take a look.

Posted by: Mike Bellis Jan 14 2016, 09:36 PM

http://americaninternationalracing.com

Most of these fiberglass guys build to order and do not have parts in stock. It took a week for QRS to build my bumper and ship it. AIR shipped my flares in 2 days.