Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Tires

Posted by: North Coast Jim Jan 23 2016, 02:04 PM

Looking to put some shoes on the "roller" 74 2 liter. In the past my old 914 was able to fit a 205/60 - 15 under the fender in the rear with a little rework of the flange.

Looking for a performance tire today that can fit Fuchs under a a non-molested rear fender. Ok maybe a little flange massaging.

Posted by: The Cabinetmaker Jan 23 2016, 03:38 PM

205/60's will fit fine on 4 bolt Fuchs

Posted by: ndfrigi Jan 23 2016, 03:47 PM

my 75 has 205x60 Yokohama on 15 fuchs.

Attached Image
Attached Image

Posted by: GeorgeRud Jan 23 2016, 05:12 PM

I replaced my old tires with 195/65-15. They look period correct and fit easily In the fender wells. However, I don't track or Autocross the car anymore.

Posted by: Marktini Jan 30 2016, 08:58 AM

QUOTE(The Cabinetmaker @ Jan 23 2016, 01:38 PM) *

205/60's will fit fine on 4 bolt Fuchs


Without fender modification?

Posted by: mepstein Jan 30 2016, 09:33 AM

QUOTE(Marktini @ Jan 30 2016, 09:58 AM) *

QUOTE(The Cabinetmaker @ Jan 23 2016, 01:38 PM) *

205/60's will fit fine on 4 bolt Fuchs


Without fender modification?

On 99% of 914's

Posted by: Ian Stott Jan 31 2016, 04:53 AM

I run Bridgestone Potenza, 205/60's on 4 bolt fuchs, no mods to wheel wells, really like those tires and they look right. Just a pleasure car, some spirited driving but no racing or anything like that. I run about 29 psi, seems to be about right.for the kind of driving I do.

Ian Stott
Moncton
Canada

Posted by: The Cabinetmaker Jan 31 2016, 06:17 AM

QUOTE(Marktini @ Jan 30 2016, 09:58 AM) *

QUOTE(The Cabinetmaker @ Jan 23 2016, 01:38 PM) *

205/60's will fit fine on 4 bolt Fuchs


Without fender modification?.

With the proper offset wheels, yes. 50's might, depending on the car, but 60's will fit. I run 205/60 kuhmo excta's on 4 bolt Fuchs. About 3/4 " clearance on both sides. Those same tires had little or no clearance on my old Dan Gurney westerns.

Posted by: RobW Jan 31 2016, 06:28 AM

I ran 205 60 15s with a quarter inch spacer all the way around on 4 lug Fuchs. Needed longer bolts though.

I'm with George running 195 65 15 s now on Dads car. Looks about right for motoring driving.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)