This is pretty inspiring. Since my car requires a paint job - this got me wondering.... RennSpeed sells CF and FG replacements for nearly all the 914 panels:
Hood, front fenders (w/flares), bumpers, rear decklid (w/ ducktail), door skins, rear quarters. That doesn't leave a lot left. Since I was planning on replacing the decklids anyway - would this be cheaper than actually having the car painted. I could rattle-can black any remaining exposed steel pieces.
Also - what additional framing would have to be added for a car with such an absence of steel? And how much weight loss do you think this would yield.
Also - the peice under the license plate in this shot is a venturi tray no?
Could we build one of these to go under a 914? Might improve cooling as well as downforce by sucking more air out from under the car.
Apparently there is also a carbon-fiber look-a-like matting that you can glue down. You could do the remaining panels in it and give your car the complete futuristic look.
I could actually just lay carbon fiber over remaining peices too. Would help seal water out :-) Epoxy resin and a skin of CF might actually be better than POR15
If you want to spend the money... DO EEET!!!
I personally dont like CF or chrome....
I was thinking it would be super-nifty to take a 914 and drill out EVERY spot weld. Then take each piece and re-make it in carbon fiber, and bond it all back together again. That'd be sooo awesome.
QUOTE (bondo @ Mar 20 2005, 01:17 PM) |
take a 914 and drill out EVERY spot weld |
you could do it by layering fg over the entire can and then spraying it with saltwater from the inside. The steel mold would rot away in about a week leaving a carbon fiber shell. Then you just beef up the CF from the inside - and you're done :-) LOL
lol
The funny thing is.. I bet it would work!
QUOTE (fiid @ Mar 20 2005, 01:23 PM) |
you could do it by layering fg over the entire can and then spraying it with saltwater from the inside. The steel mold would rot away in about a week leaving a carbon fiber shell. Then you just beef up the CF from the inside - and you're done :-) LOL |
Fiid,
That would be a sight to behold and cost a fortune. To get the Elise show quality, they must have made many pieces to make all adjoining patterns to match. Many exotic car manufacturers use CF throughtout their car but no one to my knowledge leaves them unpainted which begs the question...
Like chrome, the exposed CF pattern is used primarily for esthetics.
i dont like the look of unpainted CF when its only a hood or something, but if the entire body is carbon fiber....wow! it looks awesome, i say go for it, and you can save a ton of weight!
That elise might be CF on the outside... But i bet it's still aluminum frame/subframe on the inside.
they only replace the outer body.. but they suposedly save 101 kg.. aroubd 230 pounds....
ok made some search, they only keep the frame.. the underpan, interieor trim, enture doors.. and everuthing exept chassis is carbon fiber..
but it suposedly cost ober 10K$ usd..... but hey, you end with a 1600 pounds car and look awesome! on a teener, i would keep some chrome moldind on( or replace with polished aluminium) sail panels and around window.... and on fuchs wheels.... to create contrast would be nice
now time to save money!
so watch on ebay soon for 1 kidney...... lol
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)