Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ having a intermittent fuel pump issue ( the ghost )

Posted by: thelogo Feb 15 2016, 06:50 PM

Drove the 9 one 4
About 20 miles ,parked once engine off for two minutes, fired up drove 3 blocks
Park engine then off for 15 mins
When i go to start it no fuel pump sound or fuel getting to the engine
..............
Called for the tow waited 35 mins ,still no tow truck ,i try the fuel pump again and suddenly
It works and car runs great .


Drove the car again next day runs fine ,now


Was it the x- file phenomenon of vaper lock

Or am i way off

smoke.gif

Posted by: Mike Bellis Feb 15 2016, 06:55 PM

Try a new relay first. You might have an original 40 year old relay in there. I've had more than one fuel pump problem traced to bad relays.

Posted by: dlee6204 Feb 15 2016, 07:12 PM

I'd also check the fuse and rotate it in its holder. That has worked for me several times

Posted by: thelogo Feb 15 2016, 07:47 PM

QUOTE(dlee6204 @ Feb 15 2016, 05:12 PM) *

I'd also check the fuse and rotate it in its holder. That has worked for me several times





Can you be more specific
As in where is the fuse flag.gif

Posted by: boxsterfan Feb 15 2016, 08:00 PM

Worth it to check the relay and the fuses. I did this for mine, but in the end it was the fuel pump gone dead. My car ended up like this due to the "while I am in there" bug:




Attached thumbnail(s)
Attached Image

Posted by: Dave_Darling Feb 15 2016, 08:17 PM

QUOTE(thelogo @ Feb 15 2016, 05:47 PM) *

Can you be more specific
As in where is the fuse flag.gif


One of the two on the relay board.

--DD

Posted by: ConeDodger Feb 15 2016, 08:31 PM

Mine did this. Ultimately, had to replace it. blink.gif

Posted by: Bartlett 914 Feb 16 2016, 02:30 PM

I had similar problems. Mine was the relay board itself causing the intermittent problem

Posted by: saigon71 Feb 16 2016, 02:47 PM

Check the relays & fuses first as suggested.

Then check the wiring at the pump to make sure the connections are tight.


Posted by: thelogo Feb 18 2016, 09:02 PM

It has continued to start reliably
So i think im going to ignore until my next oil change
An value adjustment

An pray it dont leave me stranded pray.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)