Printable Version of Topic
914World.com _ 914World Garage _ Carbon Fiber Composite Center Console
Posted by: stugray Feb 17 2016, 01:17 PM
Very nice!
Clean finish on all of those pieces.
I know how to make foam core CF panels similar to that, but how did you get the nice rounded edges on the side panels?
Posted by: ntlgnt1 Feb 17 2016, 01:19 PM
That looks terrific!
Posted by: dovsky Feb 17 2016, 01:37 PM
QUOTE(stugray @ Feb 17 2016, 09:17 PM)
Very nice!
Clean finish on all of those pieces.
I know how to make foam core CF panels similar to that, but how did you get the nice rounded edges on the side panels?
I used a 2-part epoxy putty compound, which I died black during mixing. Once harden, I sanded the edges to the desired shape.
Posted by: Valy Feb 17 2016, 01:52 PM
Beautiful!
Posted by: Coondog Feb 17 2016, 02:37 PM
Gotta put this on my wish list.
Posted by: r_towle Feb 17 2016, 03:15 PM
for those of us with huge feet it may be nice to turn in that driver side like it is on the stock console.
Every little bit of room down there helps.
rich
Posted by: 02loftsmoor Feb 17 2016, 05:11 PM
QUOTE(dovsky @ Feb 17 2016, 12:18 PM)
wow that is nice. clean looking
Posted by: flmont Feb 17 2016, 09:29 PM
How much os the question,..???
Posted by: bandjoey Feb 17 2016, 09:58 PM
WOWOWOWOW!
Great Work..
Posted by: dovsky Feb 18 2016, 11:39 AM
Thank you all for your comments. The price is $499 + $60 shipping to anywhere in the EU and continental USA. Lead-time is 2-3 weeks + shipping time, which is usually <2 weeks. It includes the standard 65mmX3 hole pattern to fit the OEM gauges with their rubber rings. We can also supply the console either a blank or a custom hole pattern (price will vary slightly depending on your choice). Finish options are Satin (shown above) or High-Gloss.
Example of a custom Front Panel:
For more information, including product specs visit: http://www.compositedimensions.com/porsche-914-center-console-assembly
Questions are welcome.
Dov
Posted by: whitetwinturbo Feb 18 2016, 05:07 PM
Posted by: altitude411 Feb 18 2016, 05:19 PM
Could you do a Spread Tow Carbon? How much $ ?
Posted by: dovsky Feb 19 2016, 04:39 AM
QUOTE(altitude411 @ Feb 19 2016, 01:19 AM)
Could you do a Spread Tow Carbon? How much $ ?
Yes we can, though the cost of these fabrics tend to be about 50% higher vs. traditional 3K 2/2 twill woven fabrics. So the price of the console would go up accordingly. Spread Tow fabrics are mostly used for aerospace applications (i.e.: airplane wings) due to their excellent flatness and strength characteristics. We can make panels using 15mm or 25mm plain 12K weave spread-tow (pattern resembles a chess board), or 15mm 12K 2/2 twill, wich is the same pattern as the more traditional fabrics but ~10X larger in appearance.
Posted by: 02loftsmoor Feb 19 2016, 08:17 AM
QUOTE(dovsky @ Feb 18 2016, 11:39 AM)
Thank you all for your comments. The price is $499 + $60 shipping to anywhere in the EU and continental USA. Lead-time is 2-3 weeks + shipping time, which is usually <2 weeks. It includes the standard 65mmX3 hole pattern to fit the OEM gauges with their rubber rings. We can also supply the console either a blank or a custom hole pattern (price will vary slightly depending on your choice). Finish options are Satin (shown above) or High-Gloss.
Example of a custom Front Panel:
For more information, including product specs visit: http://www.compositedimensions.com/porsche-914-center-console-assembly
Questions are welcome.
Dov
Looking over your web site, wow I don't know what others are doing in different countries, I travel all over the US and I when I run across a GEARHEAD from another land I pick their brain and see how they do it.. Can't afforded it but WOW what products you have
Posted by: gothspeed Feb 15 2018, 07:26 PM
Wow!
Posted by: Coondog Feb 15 2018, 08:52 PM
There website has been down for sometime. Hope there still around, they made some pretty cool mods.
Posted by: sb914 Feb 15 2018, 09:30 PM
I'd love to have one to match my dash.
Along with a lower cf dash pad
Posted by: ValcoOscar Feb 15 2018, 09:33 PM
QUOTE(sb914 @ Feb 15 2018, 07:30 PM)
I'd love to have one to match my dash.
Along with a lower cf dash pad
I was thinking the same Eddy...thats a bad ass console.
Oscar
Posted by: gothspeed Feb 16 2018, 12:19 AM
QUOTE(sb914 @ Feb 15 2018, 07:30 PM)
I'd love to have one to match my dash.
Along with a lower cf dash pad
Wow! where did that dash come from?
Posted by: 1adam12 Feb 16 2018, 10:22 AM
Surprised to see you guys finally posting up here. I've had your website saved to my favorites for months now. Very beautiful products! Here's there website info on 914 products they have produced so far. https://www.compositedimensions.com/gallery
Shipping from Israel has to be pretty expensive. Maybe someone will step up and become a North American distributor for them here.
Posted by: gothspeed Feb 16 2018, 03:30 PM
QUOTE(1adam12 @ Feb 16 2018, 08:22 AM)
Surprised to see you guys finally posting up here. I've had your website saved to my favorites for months now. Very beautiful products! Here's there website info on 914 products they have produced so far. https://www.compositedimensions.com/gallery
Shipping from Israel has to be pretty expensive. Maybe someone will step up and become a North American distributor for them here.
Nice stuff!
Posted by: Mowog4 Feb 19 2018, 01:21 PM
QUOTE(1adam12 @ Feb 16 2018, 09:22 AM)
Surprised to see you guys finally posting up here. I've had your website saved to my favorites for months now. Very beautiful products! Here's there website info on 914 products they have produced so far. https://www.compositedimensions.com/gallery
Shipping from Israel has to be pretty expensive. Maybe someone will step up and become a North American distributor for them here.
Dov did a custom gauge panel for me, and I just ordered a CF Floorboard. They do great work and the shipping was reasonable.
Posted by: gothspeed Feb 19 2018, 02:00 PM
QUOTE(Mowog4 @ Feb 19 2018, 11:21 AM)
QUOTE(1adam12 @ Feb 16 2018, 09:22 AM)
Surprised to see you guys finally posting up here. I've had your website saved to my favorites for months now. Very beautiful products! Here's there website info on 914 products they have produced so far. https://www.compositedimensions.com/gallery
Shipping from Israel has to be pretty expensive. Maybe someone will step up and become a North American distributor for them here.
Dov did a custom gauge panel for me, and I just ordered a CF Floorboard. They do great work and the shipping was reasonable.
Looks awesome! Now you have to describe your gauge setup!
Posted by: 914forme Feb 19 2018, 02:30 PM
QUOTE(gothspeed @ Feb 19 2018, 03:00 PM)
QUOTE(Mowog4 @ Feb 19 2018, 11:21 AM)
QUOTE(1adam12 @ Feb 16 2018, 09:22 AM)
Surprised to see you guys finally posting up here. I've had your website saved to my favorites for months now. Very beautiful products! Here's there website info on 914 products they have produced so far. https://www.compositedimensions.com/gallery
Shipping from Israel has to be pretty expensive. Maybe someone will step up and become a North American distributor for them here.
Dov did a custom gauge panel for me, and I just ordered a CF Floorboard. They do great work and the shipping was reasonable.
Looks awesome! Now you have to describe your gauge setup!
Speedhut, common on conversion cars. Quad Gauge contains, fuel level, oil pressure, water temperature, voltage. Tach and the Speedo could be a GPS speedo, or electric pickup. They make some nice stuff at reasonable prices. I know what goes into making custom gauges.
To go back on topic, nice carbon work, I never run consoles as my feet are triple wides. Just no room for them with normal shoes on.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)