Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Anyone with access to a flowjet...or laser cutter?

Posted by: nynone4 Mar 24 2005, 02:23 PM

Anyone have access to something that cuts aluminum or stainless sheet fairly accurately? I have measured out the dash face on my six, and have drawn out a simple custom template out digitally - I just need someone who can cut it out... can anyone help?

I'll happily pay you for your time, and for the material of course.

Attached image(s)

Posted by: Jeroen Mar 24 2005, 02:36 PM

try contacting engman or ppickerell

Posted by: nynone4 Mar 24 2005, 02:45 PM

Thanks Jeroen -

I tried Engma already - he's not interested, but I'll look up ppickerell.

Posted by: ppickerell Mar 24 2005, 02:56 PM

I can help. I will need a cad file, I will need to know the thickness, and I will need to know the material.

Posted by: tat2dphreak Mar 24 2005, 03:00 PM

too bad you aren't in TX... it looks simple enough, and if the thickness is not too much, I have access to a plamsa cutter I love to play with !!

Posted by: michelko Mar 24 2005, 03:31 PM

You can do this your selve.
Did the same thing and used 1mm Aluminium. Tis material is realy easy to work with.

Attached image(s)

Posted by: Engman Mar 24 2005, 03:32 PM

Its not that I am not interested - there is a vendor on the list that is supposed to be making these - I am trying to not step on his foot.

If no one else will help you - I can do this - but I am hoping that the other vendor takes it. I have several things in the 'works' but if you have it already measured it is real simple.

M