I've been away from the powered skate board cars for a loooong time. last 914 that I had was in 1979 and then moved on to 911's.
I just did a trade off of a 930 roller and in the trade ended up with 3 914 roller's. A 70, a72, and a 74. Guess I'm back in the game. The 70 has a stock passenger seat back that incompasses 2/3 of the car firewall and reaches right over to meet the drivers seat. Has any one else seen this setup. Pictures later.
The 70 is close to being a driver and with the rebuilt 2.0 VW bus motor I have setting on the garage floor I should have a summer car to tool around in while I build the 72 into a SVX, subi trans, wide body.
Steve
AND
Is the wide seat '70 belted for 3? I seem to recall someone saying that was the original idea. Is it a real early SN?
Yes, that was the standard interior for 1970.
/3227/3004779286_63f0943dc4_z.jpg?zz=1
Early cars had the fixed passenger seat. IIRC, movable passenger seat was MY 72-up.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)