As the photo shows.....leave the large threaded collar off the turbo rod?
Appears that the new bellows fits to the rubber collar on the turbo rod
Yes.
do not use the thick washer.
Use a new tie rod end, or re-use the one you have.
The ujoint on the old tie rod is trash.
New bellows go on the setup BEFORE you install it, or you wont get them on there.
Dont forget the clamps for the bellows.
(ask me how I know)
I think I did all of it wrong the first time or two.
rich
Thanks guys.
Got the Lemforders tie rod ends a while ago. Had to get a ball joint seperator to get the old one off.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)