When I sit in the driver's seat of my '74 2.0 the car dips on that that side by 1 centimeter or so when measuring from the ground up to the fender wheel arch, passing through the center of the wheel. I get the same measurement at front and rear wheels. I weigh 190 lbs. Is that excessive sag? My shocks (Boges) are less than 2 years old. Opinions?
Ansbacher
Sounds about right.
That is also why you need to add your wieght to the drivers seat when corner balancing a car ...
Yup, or crank up the drivers side front torsion bar 1/4 of an inch higher so the car sits level with you in there.
Thanks all. I will study up on the torsion bar adjustment. I've never messed with them before.
Ansbacher
Shocks don't support weight.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)