Do they come off counter clockwise?
Also how much are they torqued?
Counter clockwise and 80 ft. lbs. is spec. If they have been ground down it can be a bitch. Mine were and I ended up using and impact gun.
You either need to brace the flywheel or use an air tool....
they could have Loc-tite on them......if so, bring out the heat
Thank you, thank you.
It's off. No lock-tite, but it must have been torqued much higher than 80lbs as I broke a socket.
As far as holding the flywheel, I used lock pliers against one of the bigger bolts out of the case as a stop, with a rag in between.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)