Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Name Those Bolts
Posted by: Headrage Mar 27 2005, 04:12 PM
I have these 2 stray bolts and I don't know where they go. 3 and 3/4 inches long 6mm.
Attached image(s)
Posted by: Type 4 Mar 27 2005, 04:23 PM
If they are 3.7 inches long they go on the top of the case
Posted by: Headrage Mar 27 2005, 05:08 PM
Where? I didn't see them in Jakes video.
Posted by: Type 4 Mar 27 2005, 05:33 PM
These two are 8mm by 95 (3.70)
Attached image(s)
Posted by: Mark Henry Mar 27 2005, 05:34 PM
He's wrong, top bolts on a case are 8mm.
I think they may have been on the cooler but they should be studs...maybe a DAPO had them on there.
Posted by: Type 4 Mar 27 2005, 05:36 PM
The oil oooler studs are 6mm x 95.
The could have been fitted there
Posted by: SLITS Mar 27 2005, 05:44 PM
From the corrosion pattern, I would guess that they are blower housing bolts....but then I really don't know.
Posted by: Headrage Mar 27 2005, 06:03 PM
Hah! I found out where they go and do not need them. Used for holding the bracket for the smog pump to the fan housing.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)