Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ drivve flange seal

Posted by: Outacontrol Mar 27 2005, 08:47 PM

When replacing a drive flange seal, I put the seal in about a 1/16" farther in than the one
I took out. The one I took out was flush with the inner lip. Has anyone done this and do you think
it will be a problem?

thanks

steve

Posted by: 9144guy Mar 27 2005, 08:50 PM

it will be ok as long as the seal isnt touching the bearing race, i usualy put the in 1/32 to 1/16 you'll be fine