My switch for the headlights / instrumentation is shot.
What is the best way to replace it?
Thanks in advance.
I pulled mine from the dash and replaced wire by wire. There's also a color diagram on pelican if you get messed up. I did the same wire by wire switch to replace my fuse panel.
Unscrew the knob. Remove the silver retaining nut (slotted) with a coin or other item that will fit the slots and it should drop right out!
There are two closely related switches: one has ten spades, the other eleven
thanks to all!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)