Took off the upper seat belt bolt and the center sheet metal screw in the vinyl trim but it is somehow still attached under the coat hook. I can rotate the bottom part of the trim panel forward about an inch but that's it because i rather not crack my trim with more force.
Magic wand needed.
Brett
Pry the rubber cover up and off the coat hook and remove the screw that holds the metal inner hook to the car
OK used a plastic spatula to pry the rubber cover off. All good.
Thanks,
Brett
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)