Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Longs and hell hole

Posted by: OU812 Apr 19 2016, 06:17 PM

I took the rockers off to get a look at the outside longs as can be seen left side is good. Took a pick hammer and no Holes
Attached Image
Attached Image
Attached Image
The right side looks the same took a pick to the whole side, everything is rock solid until I got to other that area of the long below the infamous hell hole. I picked the crap out of this area and popped the hole you see in the Long, and was able to start a small hole just below the jack point. welder.gif
Attached Image
Attached Image
I guess the news couldn't be all good!
It will give me a reason to get the wire feed out.
Still thinking its very solid for a 42 year old vehicle with the original factory paint. Here is the Hell Hole Attached Image
the shelf Attached Image
and the area where the Battery stand wasAttached Image These areas that rusty got to appear to not have been treated with the Zebart spray. Don't suppose the battery acid helped much either> Hmmmmm

Posted by: Chris H. Apr 20 2016, 07:49 AM

For Minnesota that looks VERY good. Nice find. How's the battery area?

Posted by: OU812 Apr 20 2016, 08:28 AM

QUOTE(Chris H. @ Apr 20 2016, 08:49 AM) *

For Minnesota that looks VERY good. Nice find. How's the battery area?


Thank you,

Will get some photos of that area, I found the battery tray while inventorying parts with the pedestal for it.

So it shouldn't be a difficult shot to get!

Posted by: OU812 Apr 22 2016, 07:01 PM

Hell hole and shelf

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)