So McMark thinks the advance is not happening quick enough, upon receiving my Mallory Unilite, all I did was replace one spring inside (red I think) with the recommended gray spring....I "thought" the other spring inside was gray so then I'd have gray/gray combo....now I'm second guessing my springs (at work right now so I cannot check)
thought someone might know
thanks
i changed both out. they are not the same as installed
your advance should be done by about 2800 (depending on initial advance at idle
)
i switched both out...mucho more responsive
QUOTE (Aaron Cox @ Mar 30 2005, 08:36 PM) |
i changed both out. they are not the same as installed your advance should be done by about 2800 (depending on initial advance at idle ) i switched both out...mucho more responsive |
QUOTE (Mueller @ Mar 30 2005, 09:01 PM) | ||
thanks...now to find the box with all the extra parts.....oh joy |
Did you get your "new" timing light? I was just wondering how you were doing when I came on this thread.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)