Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ GB Fuel line grommets 10mm and 8mm Correct "stopper" shape
Posted by: Mikey914 Apr 28 2016, 12:44 AM
Just finished the fuel line grommets for the fire wall area. Both are done, but I have a few other items that are done that I want to put up too so it may be a day or two as we wrap these up.
$4 a pop
I'm going stainless on my lines and will do 10mm for both, but figures there would be those that wanted the correct ones for the OEM application.
I have test fitted these on my Cary's car and they are a nice fit. The material is silicone so that it will make a great seal and are just slightly softer than the OEM to make them easier to install.
So let me know who's up for some?
Attached image(s)
Posted by: marksteinhilber Apr 28 2016, 11:07 AM
Just finished the fuel line grommets for the fire wall area. Both are done, but I have a few other items that are done that I want to put up too so it may be a day or two as we wrap these up.
$4 a pop
I'm going stainless on my lines and will do 10mm for both, but figures there would be those that wanted the correct ones for the OEM application.
I have test fitted these on my Cary's car and they are a nice fit. The material is silicone so that it will make a great seal and are just slightly softer than the OEM to make them easier to install.
So let me know who's up for some?
I'm ready for some. I guess I'll need two of the 10mm and two of the 8mm for my project car. How soon will they be made? Tell me what I need to do to order and pay. Mark S.
Posted by: BillC Apr 28 2016, 11:34 AM
Good timing, I'm almost ready to install my new stainless fuel lines. So, I'll need a set too. How many are needed? One of each or two of each?
Posted by: 914_tinker Apr 28 2016, 02:39 PM
I'll take a set. Thanks
Posted by: Mikey914 Apr 28 2016, 02:55 PM
Good timing, I'm almost ready to install my new stainless fuel lines. So, I'll need a set too. How many are needed? One of each or two of each?
One of each, but verify your tube size. I'm using 10mm for both of mine as it's easier.
Posted by: ThinAir Apr 28 2016, 05:18 PM
How about the oval grommets for passing the fuel hoses through sheet metal under the battery tray?
Posted by: Silver Surfer Apr 28 2016, 05:25 PM
I'll take a 10mm set and an 8mm set as I haven't decided yet.
Posted by: Racer Chris Apr 28 2016, 07:05 PM
How about the oval grommets for passing the fuel hoses through sheet metal under the battery tray?
Those are already available.
Posted by: Mikey914 Apr 28 2016, 07:14 PM
Yes if you are talking about the oblong one that is as a 45 degree angle I just brought some in. I am working on the grommet at the drivers firewall for the charcoal canister currently.
Posted by: sbsix May 4 2016, 04:21 PM
I'm in for a set of 8mm and 9.5mm.
Posted by: sbsix May 4 2016, 04:21 PM
I'm in for a set of 8mm and 9.5mm.
Posted by: ThinAir May 4 2016, 05:41 PM
Yes if you are talking about the oblong one that is as a 45 degree angle I just brought some in. I am working on the grommet at the drivers firewall for the charcoal canister currently.
I missed them on the site.
Posted by: relentless May 4 2016, 07:18 PM
I'd like a set. How many are needed?
Posted by: ThinAir May 5 2016, 02:08 PM
How about the oval grommets for passing the fuel hoses through sheet metal under the battery tray?
Still haven't found these on the 914rubber.com site. Would love it if someone has a link.
Posted by: Mikey914 May 5 2016, 08:26 PM
How about the oval grommets for passing the fuel hoses through sheet metal under the battery tray?
Still haven't found these on the 914rubber.com site. Would love it if someone has a link.
These will be up on Monday, if not earlier.
Posted by: Mikey914 May 9 2016, 12:21 AM
Got these up on the site right here -
10mm
http://shop.914rubber.com/Fuel-line-grommet-10mm-10mmFLG.htm?categoryId=-1
8mm
http://shop.914rubber.com/Fuel-line-grommet-8mm-8mmFLG.htm?categoryId=-1
The original configuration calls for a 8mm and a 10mm grommet. The picture shows both grommets with a 10mm on the stainless line. Again only one 8mm grommet is included for this selection I did this as individual parts rather than a kit so if you were doing stainless lines and opted to do both in 10mm, you could simply order what you want.
PM's going out to all who responded
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)