Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ New stuff

Posted by: GWN7 Mar 31 2005, 08:51 PM

So locked in my igloo during those cold winters nights, with the only source of illumination being a tallow candle in a old tin cup I made these.

Attached thumbnail(s)

Posted by: scotty b Mar 31 2005, 08:55 PM

Um...... itsa frame for your welding lens and a pair of Groucho glasses

Posted by: GWN7 Mar 31 2005, 08:58 PM

New airbox seal and side marker light gasket. (original on right)

The green arrows point towards slight defects. On the airbox seal the insert spacers were too close to the mold (wont effect it's usage, but production ones will not have those).

The Side marker seal has two air voids, these shouldn't effect production for CW's, but I will have a "it don't leak" sample seal next week or so (different design).

Posted by: GWN7 Mar 31 2005, 08:59 PM

QUOTE (scotty b @ Mar 31 2005, 06:55 PM)
Um...... itsa frame for your welding lens and a pair of Groucho glasses

Good guess...I've already got the nose to go with the glasses

Posted by: Gint Mar 31 2005, 09:36 PM

Bravo! Thanks Bruce. Airbox seal huh?

Posted by: McMark Mar 31 2005, 11:30 PM

Nice looking Bruce! After all the hubub about those door end caps, I found I had a perfect early pair in my stash. Let me know if you need them. Keep up the great work!

Posted by: GWN7 Apr 1 2005, 02:45 PM

I've got a set of the end caps. A very nice person lent me a set.

I've made 3 molds for those, but due to the design (thin material, two different angles on the legs, ect) I keep getting air trapped inside them in wierd spots. The 4th mold should end up being perfect (cross fingers). All I need now is the special UV stable material to arrive so I can start making them.