Hi
can anyone provide a picture of a 914/6 dash without its cover material on please?
There seems something not quite right with mine and i want to know if they differ around the steering column area (mine has a big hole below it as shown).
thanks
Chris.
Attached thumbnail(s)
Do you have a key on the column. Unless it's a '72, that's the problem.
(Maybe a really big problem)
looks like the clamshell and the column covers are wrong
Here is what it's suppose to look like on a factory Six
Attached image(s)
Nevermind, I see from other posts you have a conversion car. Carry on.
I think that is a 911 clamshell... and later as well.
Also.... there is no 'eyebrow' on the right side.... can't see the left.
It is definitely not a 4 cyl. column.
just seen rgalla9146's response - maybe onto something....
what exactly are you referring to as an 'eyebrow'?
these are a couple more pics i have to hand at the moment:
Attached thumbnail(s)
Look at the picture that 'toolguy' provided.
the 'eyebrows' are on either side (left and right) of the clamshell.
If your car is a conversion with the column positioned incorrectly all bets are off as far as
accurate fit.
here ya go - from 1970 914-6 euro car - 9140431498 - parted it out long ago
.
.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)