Printable Version of Topic

Posted by: brant May 26 2016, 08:50 PM

My int. Relay test good yet my int feature is not working

Can anyone tell me how the find a wiring diagram thread.... or wiring description
so I can better trace my wiring

Thanks in advance
Tia

Posted by: Valy May 26 2016, 09:10 PM

1. Look at the wiring diagram for your car specific year on the Pelican site.
2. How did you test the relay?
3. What switch do you have. Not all of them have the int. functionality.

Posted by: brant May 26 2016, 10:35 PM

It worked previously and I converted the switch 25 years ago before the Internet
My wire colors aren't in a factory wire loom for int wipers

I have two relays that test good
There is a thread for testing them linked to world. From a 924/44 site

I didn't find the diagram in Haynes but can search pelican tomorrow
Figured ther was likely a thread on world but couldn't find it

Posted by: steuspeed May 27 2016, 12:15 AM

I have not done mine yet, but look for a .99 programmable relay if you do it. You select intermittent and then off again re-select and that sets the timing.

Posted by: Jeff Bowlsby May 27 2016, 05:22 AM

The schematic and installation instructions are at the bottom of my wiring harness webpage (in the reference library). 2 separate documents.

http://bowlsby.net/914/WiringHarnesses/

Posted by: brant May 27 2016, 06:26 AM

QUOTE(Jeff Bowlsby @ May 27 2016, 05:22 AM)