Does anybody know what is the base circle radius of the Type4 Camshaft?
Thanks
http://www.elgincams.com/campaper.html
These guys sell a stock size and a 1" base circle camshaft also.
http://www.europeanmotorworks.com/vw/type-4-camshaft.html
thanks to all!
Measure any cam the same way you would turn,mill and grind it,in roller-blocks mounted to your mill.
Use a height guage,or calipers,to determine the radial difference.
Currently,you would map the cam profile with a cmm,or spc sending indicator.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)