Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Need some help on a bolt size

Posted by: ottox914 Jun 10 2016, 04:49 PM

I have a weltmeister adjustable sway bar on the rear of the 914. Over the course of packing up my life and moving, I have lost pair of bolts. These are the bolts that go thru the drop link, and into the huge bolt that goes thru the shock and into the trailing arm.

Anyone know the correct size bolt to go back in there? Got an autox this weekend, got the motor back in last week, and would sure like to go scare some cones.

Thanks-


Posted by: jcd914 Jun 11 2016, 12:35 AM

QUOTE(ottox914 @ Jun 10 2016, 03:49 PM) *

I have a weltmeister adjustable sway bar on the rear of the 914. Over the course of packing up my life and moving, I have lost pair of bolts. These are the bolts that go thru the drop link, and into the huge bolt that goes thru the shock and into the trailing arm.

Anyone know the correct size bolt to go back in there? Got an autox this weekend, got the motor back in last week, and would sure like to go scare some cones.

Thanks-


IIRC they are 3/8 NF, Ace hardware would probably have them.
This just from memory though, nothing here to verify with.

Jim

Posted by: siverson Jun 11 2016, 12:47 AM

Not 3/8.

Here you go:

http://bfy.tw/6DNo

smile.gif

piratenanner.gif

-Steve

Posted by: Harpo Jun 11 2016, 11:33 AM

I don't believe he is referring to the M18 bolt. It sounds like he is threading in to the M18 shock bolt. Obviously a photo would help

David

Posted by: ottox914 Aug 24 2016, 02:46 PM

Bolt is a 5/16 fine thread. Here's where it goes and what goes there.


Attached thumbnail(s)
Attached Image Attached Image Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)