Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ show me your rear. (sway bar, that is)

Posted by: ottox914 Apr 7 2005, 06:08 AM

Over the long cold vinter in way up north, WI, I picked up a weltmeister rear sway bar. This weekend looks good for some warmer temps and quality garage time. Anyone installed one and can share photos of where exactally to drill for the mounts? It does come with fairly clear directions, but no templates for the drilling, and with a bit, drill, and metal, I'd like to get it close enough to right the first time.

Posted by: rhodyguy Apr 7 2005, 10:05 AM

take a look at the "fun in the garage with al and kevin" thread we did this 2 days ago. if you look up in the back you will see a hole that acts as a witness for placement. tack the 2 brackets, put the bar in and check for binding. 2 people makes this task much easier.

k

Posted by: Dave-O Apr 7 2005, 07:18 PM

Hey Dave, I'll give you a quick Doesn't look like I will be able to swing by this weekend to help you out or play with the scales. Are you going to be in town next weekend for the school? Maybe we could to a little "tuning" on saturday afternoon. It looks like I might make the PCA event on sunday afterall!!! Cheers,

David

Posted by: trekkor Apr 7 2005, 07:33 PM

Don't know if this helps...

KT

Attached image(s)

Posted by: ottox914 Apr 7 2005, 08:25 PM

Thanks all for the photos- anyone with a weltmeister install to share, as thats what I've got to install?

Dave-o: bummer you can't stop by, saturday will be a big day, getting the camber plates and sway bar in, and scuffing in the hoosiers... and yes, I'll be in the cities the following weekend, as I need to go over the novice school teaching plan with the instructors and get them all on the same page on saturday. Planning to be at the PCA event sunday. Give me a call over the weekend if you can.