Mine look like crap and there's no new stock (that I can find). Anyone have any ideas?
Or convert to GT style straps.
Link is to the real thing, but there are copies kicking about. There is a guy on eBay appbiz? Something like that who makes a copy (strap and hole to my mind is not right)
Plus Mike was doing door panel GB. There was talk of a GT panel option but I don't think it came together
One of the tricky bits to replicate is the metal rectangle trim that goes through the panel. That (and the incorrect strap) if I recall is what is missing from appbiz
I managed to find a pair of trims in Germany, if you wanted to copy them I'd be happy to dig out from the stash, photo and measure for you
http://www.pbase.com/9146gt/gt_door_panels
I bought the repro's and they are nice. You'd have to look hard to tell the difference. Picked them up at Aitomotion I think
The local bug shows always have them, but beware of the cheap Chinese knock offs.
I bought a pair of nice chrome ones and one of them died, so I replaced it with two VW rabbit winders. They don't look too bad.
http://www.socalautoparts.com/index.php/window-cranks-amp-door-handles-c-1256_1325?page=2
The above place also carries them. I need to swing by and check the quality.
Take off the old ones and look at the part number, they are just aircooled VW handles, nothing special.
Can't remember, but they are bus or 411/412 handles...something like that.
Same with the winder handles. I think they are 70's beetle/bus.
Does the early handles have the chrome center? If so they are T3.
If the part number starts with 1, 2, 3 or 4 it's a VW aircooled number.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)