Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Handbrake clevis question.

Posted by: RoadGlue Apr 11 2005, 01:59 PM

Is the handbrake clevis pin the same as the clevis that's used on the pedal-side of the clutch cable? Mine is toast, and took a bit of grinding, a vise and a punch to remove it. Needless to say, I'm in need of a new one.

Thanks,

Posted by: RoadGlue Apr 12 2005, 09:48 AM

Posted by: McMark Apr 12 2005, 10:27 AM

I made one for one car I'm working on. Bought a long clevis pin of a larger diameter than stock (hole was ovaled). Cut to length, put the new clevis in a drill and use a hacksaw blade to cut a new groove in it and then put a new circlip on it. Sounds backwoods, but it's almost indistinguishable from the stock one.

Posted by: Cap'n Krusty Apr 12 2005, 10:32 AM

It's a bit smaller, IRRC. The pin is the same size, but the clevis clip is smaller. The Cap'n