Looking for some advice, the engine lid on the passenger side has a large gap but it looks ok on the drivers side any ideas why?
Thanks
http://s1300.photobucket.com/user/DavidGbgSweden/media/IMG_3167_zpskr0guoed.jpg.html
http://s1300.photobucket.com/user/DavidGbgSweden/media/IMG_3169_zpskaemtujm.jpg.html
Shrinkage from the cold
Actually it's just out of alignment. Should be consistent with all the other gaps on the car.
Also look like it's a little low on the right side by the window glass. . better
check the hinge bracket on the firewall for cracks. .this is what happens when the hinge angle bracket cracks at the curvature. . also adjustable side to side by loosening the hinge bolts and slide it to the right. .
You're missing the rear window to engine deck lid seal also. .
As noted its off on both sides.
Looks like you need a window seal...
IIRC there is some black edge trim for the lid.
Your sticker reminded me that I actually heard a Ziebart commercial on the radio today. I thought they were a company gone many years past.
Brett
I had a look at it today and i dont see how the lid can be adjusted from side to side.
Whats the procedure?
Thanks
I had the same thing on a previous 914. I had to weld in new mounts from restoration design. One side was cracked and failing.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)