as the title says how do u connect a throttle cable to the suby engine?
Connect it to the throttle body...
Not sure about a Subie but I had to make a custom cable for all of my conversions except the latest one. There is no throttle cable on my Audi conversion...
I used the stock 914 throttle cable and fabricated a couple of brackets. Here are a few pictures. It is a bit dark in the garage right now so I took the pictures using a flashlight.
I think mine had a barrel nut holding the end, if that is what you are referring to?
I like A&P's, God damned show off. Terry Cable (800-854-4691) will make you one. Ask for Able. It's a longer 914 cable. The cable is about 3-4" longer while the sheath remains stock, IIRC. Do this; place your stock cable as it will be in use then measure how short it is. They will ship it with a barrel nut. Order it a little on the long side. You can trim off the extra.
I saw another approach (maybe ChrisH's) where the stock Suby cable was used on the TB side then attached to the stock cable via a swedgelock fitting.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)