Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Mounting an MSD
Posted by: Sparky Apr 13 2005, 06:22 PM
Like it says, let me see your pics of where you have your MSD or Crane mounted.
Thanks!
Mike D.
Posted by: trekkor Apr 13 2005, 06:30 PM
ok...
Attached image(s)
Posted by: synthesisdv Apr 13 2005, 07:08 PM
same spot as the old ECU
Attached thumbnail(s)
Posted by: rhodyguy Apr 13 2005, 07:18 PM
i just put one in today. box and tack adapter on the rear of the fire wall near the battery. i wouldn't do that without an opitma. i still have to tidy up the wires. that's a clean install dave. did you just buy a length of wire to run to the trunk? can you show me a picture of the plug end of the wires?
k
Posted by: Sparky Apr 13 2005, 07:58 PM
David nice clean install! I like where Trekkor put his and may do the same. I'm keeping the battery in the stock location for now...
Keep them coming!
Thanks!
Mike D.
Posted by: Aaron Cox Apr 13 2005, 08:03 PM
trekkor copied me.... mine was on the rear bulkhead in the trunk first.....
Posted by: iamchappy Apr 13 2005, 08:24 PM
mine is crammed in here.
Posted by: iamchappy Apr 13 2005, 08:25 PM
what? picture didnt take....
Attached image(s)
Posted by: Mueller Apr 13 2005, 08:28 PM
| QUOTE (Sparky @ Apr 13 2005, 05:22 PM) |
| Like it says, let me see your pics of where you have your MSD or Crane mounted. Thanks! Mike D. |
my Mallory HyFire CDI is still in the box it came shipped to me in
good thread, I think I'll end up mounting it in the trunk ...
Posted by: J P Stein Apr 14 2005, 01:46 AM
Yeah, we gots one of them'uns
Attached thumbnail(s)
Posted by: joea9146 Apr 14 2005, 04:28 AM
Here ya Go
Attached image(s)
Posted by: MJHanna Apr 14 2005, 05:56 AM
in rear trunk
Attached image(s)
Posted by: MJHanna Apr 14 2005, 05:58 AM
nother shot
Attached image(s)
Posted by: synthesisdv Apr 14 2005, 06:09 AM
MJ,
what is that black plate to the right in your trunk? Some kind of filter?
Posted by: Joe Ricard Apr 14 2005, 06:13 AM
Mine is in the same place as JP Stiens. Good choice hasn't gotten wet yet. and it can really rain around here.
Posted by: MJHanna Apr 14 2005, 06:37 AM
| QUOTE (synthesisdv @ Apr 14 2005, 06:09 AM) |
| MJ, what is that black plate to the right in your trunk? Some kind of filter? |
oberg oil filter in addtiton to "normal filter. it has a light that if it started to clog it would go on. it could help you save an engine if you were losing bearings ect.
Attached image(s)
Posted by: brant Apr 14 2005, 08:47 AM
I guess I copied Joe, Joe, and JP without really knowing it:
Attached thumbnail(s)
Posted by: HarveyH Apr 14 2005, 11:44 AM
Not an MSD but...
Attached image(s)
Posted by: HarveyH Apr 14 2005, 11:45 AM
And the coil:
Harvey
Attached image(s)
Posted by: Doug Leggins Apr 14 2005, 11:53 AM
Not mine. But one I like that I saw posted here from "Racing916"
Attached image(s)
Posted by: Joseph Mills Apr 14 2005, 01:07 PM
| QUOTE (brant @ Apr 14 2005, 08:47 AM) |
| I guess I copied Joe, Joe, and JP without really knowing it: |
I'm innocent as well.
Attached image(s)
Posted by: ArtechnikA Apr 14 2005, 04:09 PM
here ya go. wasn't room in the engine bay in any of the 'conventional' locations, all of which get hot and wet anyway. so it's mounted on the left side interior panel. since it's a Targa, it only gets wet in this location...
as you can see - some of the installation is in 'prototype' trim...
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)